DIY Bunny Basket

Easter is almost here!! I can believe it. Well maybe because the weather here has been a tad bit on the freezing side! But any hoo, I wanted to make the kiddos baskets this year. Like actually make them. I usually just buy Dollar Tree baskets and fill them with goodies. This year I wanted to make something they could hold on to for a couple of years. And who knows maybe give to there children :D. Here is an easy peasy tutorial on creating your very own Bunny Basket!!

SORRY ABOUT THE ALIGNMENT OF PHOTOS. THEY ARE FINE IN DRAFT BUT ARE MISALIGNED SOMEHOW O_o

What you need:

1 weaved basket (rectangle or square is best but round will do) ($1 Dollar Tree)
1 Styrofoam ball ($3 Hobby Lobby)
2 Packs of Jumbo Loopy Chenille (doll accessories) ($2.99 ea Hobby Lobby)
6-6mm 12in Pink Chenille ($0.87 Hobby Lobby)
3-6mm 12in White Chenille ($0.87 Hobby Lobby)
2-35mm Wiggle Eyes ($0.99 Hobby Lobby)
1-2 1/2 in White Pom Pom (3 for $0.99 Hobby Lobby)
1 Felt Shape Sticker (pink heart)
1-Super Jumbo Craft Stick
Hot Glue Gun and Glue Sticks
White Paint
Paint Brush
Scissors
Hot Pink Hair Bow for Girl
or Blue Bow Tie for Boy

Step 1 Paint

Paint your basket with white paint. I started using acrylic paint from Hobby Lobby but it was not white enough. I ended up using Behr Premium Plus Ultra Pure White UL200. If you do get the Behr get the paint and primer in one. I just got a sample sample jar. $3 from Home Depot. Paint two coats. Let paint dry between coats. Be sure to paint along the grain of the wood. Which is the lines in the wood. So either left to right or up and down. Depends on your basket. Set basket aside. Paint your Popsicle stick as well. two coats. Set aside.

TIP (you can insert the popsicle stick in basket during this step and just paint over it)

Step 2 Head

You can start by plugging in your hot glue gun. Keep sticks near by. Starting from the bottom wrap the jumbo loopy chenille around your Styrofoam ball. I used a 5 in ball. If you need to, use straight pins to hold the chenille in place. At this point you are just measuring. Once you have completely covered the ball all the way to the crown, cut off the excess. Be careful cutting the chenille. Its curls will stray if you cut them. Try to cut the wire. Once you have measured the right amount of loopy chenille, unravel to the beginning. Using your hot glue gun, glue the chenille to the ball. Pressing firmly will ensure that the chenille will be secure. Set aside.

Cut off excess

Hot glue a little at a time

Bottom

Step 3 Ears

Take one pink pipe cleaner and fold it in thirds. Carefully hot glue the pipe cleaner together. Take the next pink pipe cleaner and hold in half. Hot glue it to the outer edge of the folded pipe cleaner. Take the last pipe cleaner fold in half and glue to the outer edge of the halved pipe cleaner. Twist the bottom of the pink pipe cleaners to secure. Repeat for second ear. Measure 2 pieces (13 in long each) of jumbo loopy chenille. Hot glue the jumbo loopy chenille to the outside of the pink pipe cleaners. Twist bottom of loopy chenille to secure. Repeat for second ear.

Step 4  Ears and Head

Using the point of the paint brush, poke a hole in the top of the head for the first ear. On the bottom tip of the ear place a few drops of hot glue and immediately insert into hole. Repeat for second ear.

Step 5 Face

Whiskers-Take three white pipe cleaners and twist at the middle. Place a drop of hot glue on the center of pipe cleaners and place the pink heart sticker without removing the backing. Add more hot glue to the back of the heart sticker and adhere to the center of the bunny head. After hot glue cools, trim the whiskers to a length of your liking. You can now hot glue the eyes to the face. Set head aside.

Step 6 Secure Head to the Basket

Take a plain popsicle stick and weave in and out in the inner backside of basket. Be careful not to crack the basket. Note how much of popsicle will he above the rim of the basket. This is the amount that you will need for the head. Make a mark and remove. Carefully turn head upside and slowly push popsicle stick inside head to mark. Remove. Now you can take your white painted popsicle stick and insert into the same spot as before. Add hot glue to the front and backside of popsicle stick and immediately place head on popsicle stick. Hold the head for a few seconds to allow hot glue to cool.

                                

Step 7 Final Touches

Measure about 42 in for the arms and shoulders. The arms need to be doubled up along the edges of your basket. Its easier if you twist the ends to secure. Hot glue the shoulders to the back top edge of basket just under the head. If you have a handle that moves, make sure that it is in the upright position. Glue one arm at a time.

Now for the feet. Cut 2 10 1/2 in strips of loopy chenille for the feet. Take one strip and fold in half. Twist bottom then fold upwards to secure. Repeat for second foot. On the side where you folded the bottom of chenille upwards, apply adequate amount of hot glue and place on front of basket at a slight angle. Repeat for second foot. Glue your pom pom at the bottom between the two feet.  Add your bow and your done!!

Easy Peasy!! Hope you find this tutorial easy to follow along. :D Comments are always welcome. Join my blog to keep up with the latest post. Planning a Spring/Summer giveaway!!

DIY T-Shirt Decal/Transfers (Things)

DIY T-Shirt Decals/Transfers

Directions for Dr. Seuss' Thing 1 & Thing 2

You have seen them everywhere. Many malls have kiosk that make them. Of course for an outrageous price. I need a Thing 1 shirt for my son, so went to my local mall. There it was. Right by the food court. The t-shirt making kiosk. I asked the young teenager how much the t-shirts were...$20, $15 with your own shirt. Now keep in mind, this was a child size I inquired about. You have got to be kidding me. Clothes are already too expensive let alone a t-shirt kiosk that just irons on these cute little sayings. Im in the wrong business seriously!! Of course I knew my only options were to buy the expensive shirt, or make it myself. Well of course I made it myself. (You can check that out in the Just For Kids section). Here is a tutorial on making these decals using mostly what you already have access to:

Things you need:

Computer

MS Word (or any document software)

Printer

The Easy Peasy Steps

Open MS to create a new Word Document. 

Go to your Insert Tab-Shapes-Basic Shapes- and select Circle

Draw your circle shape. Ctrl+S to save. Name your document.

You can never save too much. After loosing my work on a high school essay many moons ago...lesson learned. I save very often :D

The Format Tab should open automatically. Select Shape Fill-No Fill.
Then select Shape Outline-Weight-More Lines. Ctrl S.

You can choose a value for the thickness of your line. I chose 10. Ctrl+S. 

Go to the Insert Tab-Word Art-And choose any style you like.
 Type the wording of your choice. Ctrl+S.

Go to the Format Tab-Text Effects-Transform-Follow Path-Button. Ctrl+S.

This will allow your wording to round or type in a circle.

Lastly you can change the font size to fit your shape. Ctrl+S.

After saving you can print to see if you need to make any changes. Don't worry about centering the shape itself because you will be cutting it out anyways when you print on the transfer paper. Print on plain printing paper as much as you need to. That way you wont waste you transfer paper.

Thanks for the support. Your comments are always welcome. Thanks again.

Create with Microsoft Word

Finally had a breather to play with my new font! I have been looking for places to get my monogram printed but it can be pretty pricey. My motto is "I won't pay someone to do something that I can do unless absolutely necessary." Since I like to use paper calendars instead of the more modern day technology apps, I created a calendar in 45 mins using Microsoft Word. I think monograms can make anything look elegant. If you would like to create your own monogram calendar I have created a template that you can use. All you need to do is edit it to your liking. Enjoy!!

This is a screenshot of the file. Download using the link.

Use this link to access my DropBox file:

DIY Monogram Calendar

DIY: T-Shirt Sac

I had so much fun creating this little number. I see bags in many stores that look like they were once t-shirts. I was definitely not paying $20 for one especially if I could make it myself. Finally I had some clothes to create one with. My daughter had spaghetti one day at preschool and of course ruined her top. I wasn't upset, after all it's bound to happen at preschool. 

If you would like to create this easy T-Shirt Sac, just follow the directions below.

First you will need the following:

• T-Shirt ( I used two ONLY because her LOVE shirt was very thin)
• Scissors
• Thread (best to use the same color as your shirt)
• Needle (if you are going to hand stitch, by all means you can use a sewing machine)
• Straight Pins
• Tacky Glue (optional if using two shirts like I did)
• Ribbon
• Feather Boa

EASY TO DO PICTORIAL DIRECTIONS

Cut off desired amount from bottom of t-shirt. I cut about two inches above hem.

After Cut

Turn shirt inside out and pin the bottom off the shirt Then stitch a seam under

straight pins across the bottom of shirt.

****IMPORTANT IF USING TWO SHIRTS IF NOT KEEP SCROLLING UNTIL YOU SEE  HEART SMILEY FACE****

**REPEAT ABOVE STEP FOR SECOND SHIRT WHICH IN THE END WILL BE THE LINING OF THE SAC**

Turn 2nd shirt inside out.  Pin the bottom of shirt with pins. Sew a seam under the pins. Turn **2nd**
shirt ONLY back right side out.

2nd Shirt right side out. You should be looking at the seam at this point.

Pinch 1st shirt while hand is still in the inside of lining. Pull  1st shirt
over lining. DON'T LET GO

Secure two shirts together with pins at each corner, both sides, and  bottom

Using Tacky Glue adhere edge of lining to the inside outer shirt all around

Using tacky glue, adhere ribbon or straps of your choice to shoulder of t-shirt sac
Secure with straight pins

Sew boa to outer outside top edge of sac. Be sure to sew boa securely over straps to keep
them from falling off.

Finished T-Shirt Sac

***IF YOU ARE NOT USING 2 SHIRTS JUST SKIP TO PICTURE UNDER THIS SENTENCE***

Turn sac back right side out looking at the seam.
THIS IS THE 2nd SHIRT WHICH IS INNER LINING
Still same concept. I  forgot to take a picture using my LOVE  shirt.

Glue ribbon or straps of your choice to  inside shoulder of t-shirt
secure with straight pins

Sew boa to outer outside top edge of sac. Be sure to sew boa securely over straps to keep
them from falling off.

Finished T-Shirt Sac

What do you think? Comments are always welcome :D If you have questions you can post them here too.

Enjoy lovelies!!